Achievers Automation Limited
Add to Cart
Pepperl Fuchs HART MUX Secondary Module KFD0-HMS-16
16-channel
No external power required
HART field device input (revision 5 to 7)
Used with HART MUX primary module KFD2-HMM-16
Up to SIL 3 acc. to IEC/EN 61508
General specifications
HART MUX Secondary Module
Functional safety related parameters
Safety Integrity Level (SIL) SIL 3
Supply
Connection via 14-channel flat cable from the KFD2-HMM-16 primary module
HART signal channels (non-intrinsically safe)
Conformity HART field device input (revision 5 to 7)
Connection 26-pin flat cable for analog connections
14-pin flat cable for primary module/secondary module connection between KFD2-HMM-16 and KFD0-HMS-16
Leakage current < 3 µA at -20 ... 85 °C (-4 ... 185 °F)
Terminating resistor external 230 ... 500 Ω standard (up to 1000 Ω possible)
Output voltage ≥ 400 mV ss (with the terminator resistance specified above)
Output resistance 100 Ω or smaller, capacitive coupling
Input impedance according to HART specification
Input voltage range 0.08 ... 4 V ss ; typ. ± 5.2 V as local reference
Indicators/settings
Labeling space for labeling at the front
Directive conformity
Electromagnetic compatibility
Directive 2014/30/EU EN 61326-1:2013 (industrial locations)
Conformity
Degree of protection IEC 60529:2001
Ambient conditions
Ambient temperature -20 ... 65 °C (-4 ... 149 °F)
Mechanical specifications
Degree of protection IP20
Mass approx. 100 g
Dimensions 20 x 93 x 115 mm (0.8 x 3.7 x 4.5 inch) (W x H x D) , housing type B1
Mounting on 35 mm DIN mounting rail acc. to EN 60715:2001
Data for application in connection with hazardous areas
Certificate PF 07 CERT 1143 X
Marking Ex-Hexagon II 3G Ex nA IIC T4 Gc
Directive conformity
Directive 2014/34/EU EN 60079-0:2012+A11:2013 , EN 60079-15:2010
